炭素/硫黄分析計 ELEMENTRAC CS‑d

お見積りは無料です!

各商品の「注文データ＆見積依頼」のタブを開いて、お見積りご希望の商品にマークを入れると、見積カートに商品が入ります。商品右欄にマークをいれ、カートに入れると見積依頼リスト作成画面に進みます。コンタクトフォームに必要事項をご記入いただき送信すると、弊社担当者から折り返しお見積りをお送りいたします。

お問い合わせ

必要なアイテムがわからない、または一般的な見積もりを希望する場合は、こちらをご覧ください。

お問い合わせはこちら

ELTRA CS-d

(Please order PC, monitor, balance and consumables (starter-kit, anhydrone, sodium hydroxide, Pt/Si catalyst) separately)

Measuring ranges at 1000 mg sample weight (induction furnace) || 350 mg sample weight (resistance furnace)
(further measuring range combinations on request) 2)

induction furnace || resistance furnace

88200-1211

CS-d

2xC

0.0001 – 7 % C

||

0.004 – 62.8 % C

88200-1212

CS-d

2xS

0.00006 – 2.3 % S

||

0.001 – 31.4 % S

88200-1233

CS-d	2xC	0.0001 – 7 % C	\|\|	0.004 – 62.8 % C
	2xS	0.00006 – 2.3 % S	\|\|	0.001 – 31.4 % S

Every configuration can be equipped with an autoloader for the induction furnace.
No special “autoloader ready” configuration has to be purchased.

Required accessories

PC, モニター, 天秤

88600-0006 Industrial computer

71015 Computer with Intel Core i5-8400 Processor, 256 GB SSD; 8 GB RAM; Windows 10 operating system; keyboard; mouse

88400-0584 Monitor, TFT (23.8")

88600-0002 Balance (resolution 0.0001 g)

88400-0592 Laser printer

Required consumables / chemicals for first operations

88500-0002 Starter-kit for 1,000 analyses
(500 crucibles, 2,500 g tungsten, 908 g pure iron accelerator, 50 g glass wool, 50 g cellulose, 50 g quartz wool, 50 re-usable boats, 500 disposable porcelain boats, 100 g Combsolid)

90200 Anhydrone (magnesium perchlorate), 454 g 1)

90210 Sodium hydroxide, 500 g 1)

88400-0535 Pt/Si catalyst,15 g

88600-0021 Copper oxide wire (0.5*2 mm), 100 g (could be used alternatively to Pt/Si catalyst) 1)

Further options and consumables

Accessories (Hardware)

36999 HTF 540; Preheating furnace for crucibles

72070 Oxygen regulator

88200-9000 Carrier gas purification furnace, without filling (please order filling and quartz wool separately)

88400-0122 Filling for carrier gas purification furnace (CS)

88400-0610 Barcode scanner

38001 TIC-Module

88200-1400 Autoloader (36 positions) for induction furnace

88200-0160 Autoloader (130 positions) for induction furnace

88600-0025 Vacuum cleaner for induction furnace (with HEPA Filter)

88600-0020 Halogen trap CS-i / CS-d

Crucibles and lids for the combustion furnace

90149 Ceramic crucibles, premium, Ø 1”,
foil-wrapped, 1,000 pieces

90148 Ceramic crucibles, premium, Ø 1”,
bagged, 1,000 pieces

88400-0176 Ceramic filtering crucibles, 100 pieces

88600-0014 Ceramic lids, 10 mm hole, 250 pieces

88600-0017 Ceramic lids, 4 mm hole, 1000 pieces

Boats for the resistance furnace

90153 Re-usable ceramic boats, premium, 58x22x14 mm, 500 pieces

90160 Disposable porcelain boats, 86 x 13 x 10 mm, 1000 pieces

88600-0011 Re-usable ceramic boats, 95 x 13 x 10 mm, 500 pieces

88400-0502 Re-usable inconel boat, 54 x 18 x 13.5 mm, 1 piece

88400-0503 Re-usable inconel boat, 54 x 18 x 9 mm, 1 piece

Accelerators for the induction furnace

90220 Tungsten, premium, 2,500 g

90260 Iron accelerator, premium, 908 g

88600-0013 Iron accelerator, high purity, 454 g

88600-0010 Eltracell tungsten-tin accelerator, 750 g

90280 Tin accelerator, 908 g

90240 Copper accelerator, 1392 g

Combustion support for the resistance furnace

90840 Quartz sand, 100 g

88600-0008 Combsolid, 100 g

Chemicals

90200 Anhydrone (magnesium perchlorate), 454 g 1)

90210 Sodium hydroxide, 500 g 1)

88400-0535 Pt/Si catalyst, 15 g

90331 Glass wool, 454 g

90340 Cellulose, 100 g

90341 Cellulose, 50 g

90330 Quartz wool, 50 g

92610 Tube of high vacuum grease, 35 g

88400-0122 Filling for carrier gas purification furnace

91000-1005 Copper, flakes, 25 g

88400-0508 Steel wool, 454 g

88600-0021 Copper oxide wire (0.5*2 mm), 100 g (could be used alternatively to Pt/Si catalyst)

General tools and accessories

23110 Spatula, 1 piece, M size

23111 Spatula, 1 piece, L size

23113 Spoon, 1 piece, for dosing sample and accelerator in CS series

90145 Tongs for ceramic crucibles and boats, 220 mm 1 piece

88400-0229 Tweezers (160 mm), curved, 1 piece

88400-0472 Tweezers (145 mm), straight, 1 piece

88400-0475 Set with 6 spatula and 1 tweezers for multiple weighing procedures

88400-0476 Micro spatula, 1 piece, XS size, for filling small capsules

Tools for storage, transporting and weighing

36121 Quartz boat, 74 x 22 x 10 mm, 1 piece, for weighing pins

71010 Brush, 16 mm, 1 piece, for cleaning balance from dust

88400-0477 Weighing boat, 1 piece, for weighing and usage of granulates

88400-0509 Metal pan, 1 piece, for storage of used crucibles, boats

88600-0015 Crucible holder, for storage of crucibles

Tools for maintenance

51200-8000 Maintenance kit CS-d

88400-0473 Powder funnel (plastics), 1 piece, for easy filling of chemical tubes

88400-0489 Rubber plug 14 x 20 x 24 mm, 1 piece, for sealing small glass tubes like 88400-0006

88400-0490 Rubber plug 29 x 35 x 30 mm, 1 piece, for sealing big glass tubes like 09090

88600-0026 Anhydrone filter tube

88600-0027 Sodium hydroxide, Anhydrone filter tube

Tools for CS analyzers

36216-2001 Combustion boat insertion stick, 1 piece (only for CS-d)

36218-2001 Combustion boat removing stick, 1 piece (only for CS-d)

88400-0332 Threaded rod M4x150, 1 piece, for removing paper filter holder

88400-0499 Safety glasses, 1 piece, protection when working with hot furnace

88600-0009 Screen glass with edge guard, 1 piece, protection when working with hot furnace

Calibration materials

Calibration materials may show slight variations depending on the current lot.
To see the current certification please visit www.ELTRA.com.

Steel and cast iron

92400-3020 Steel, 150 g, 0.001 – 0.01 % C Details

92400-3030 Steel, 150 g, 0.01 – 0.05 % C Details

92400-3050 Steel, 150 g, 0.1 – 0.2 % C Details

92400-3060 Steel, 150 g, 0.2 – 0.5 % C Details

92400-3061 Steel, 150 g, 0.2 – 0.5 % C Details

92400-3062 Steel, 150 g, 0.2 – 0.5 % C Details

92400-3070 Steel, 150 g, 0.5 – 1.0 % C Details

92400-3090 Cast iron, 150 g, 2.0 – 3.0 % C Details

92400-3091 Cast iron, 150 g, 2.0 – 3.0 % C Details

92400-3100 Cast iron, 150 g, 3.0 – 5.0 % C Details

92400-3101 Cast iron, 150 g, 3.0 – 5.0 % C Details

92400-3102 Cast iron, 150 g, 3.0 – 5.0 % C Details

92400-4005 Steel, 150 g, ~0.05 % S Details

92400-4010 Steel, 150 g, ~0.1 % S Details

92400-4020 Steel, 150 g, ~3 % S Details

Steel pins

Details

92500-1001 C/S pins, 454 g, ~0.2 %~C Details

92500-1002 C/S pins, 454 g, ~0.4 %~C Details

92500-1003 C/S pins, 454 g, ~0.8 %~C Details

92500-2001 C/S pins, 454 g, ~0.2 % S Details

Tungsten carbide

90816-3001 Tungsten carbide, 100 g, ~6,1 % C

Other calibration material suitable for resistance and induction furnace

90812-3001 Limestone, 25 g, 0.04 % S

90812-3002 Limestone, 25 g, 0.4 % S

90812-3003 Limestone, 25 g, < 5 % C

90812-3004 Limestone, 25 g, 5 – 10 % C

90817-3001 Soil, 25 g, > 2 % C, S

90817-3002 Soil, 25 g, < 1 % C, S

90817-3003 Soil, 25 g, > 2 % C, S

90817-3004 Soil, 25 g, < 2 % C, < 1 % S

91900-1001 Ore, 30 g, ~1.4 % S

91900-1002 Ore, 30 g, ~4.2 % S

91900-1003 Ore, 30 g, ~3 % S

91900-2001 Zinc sulfide, 50 g, 32 % S

90810 Calcium carbonate, 100 g

90821 Barium sulphate, 50 g

Other calibration material only suitable for resistance furnace

90710-3010 EDTA, 50 g

90710-3030 Sucrose, 50 g

90824 Sulfanilic acid, 50 g

92511-3005 Coal, 50 g, < 0.1 % S

92511-3010 Coal, 50 g, 0.1 – 0.5 % S

92511-3020 Coal, 50 g, 0.5 – 1.0 % S

92511-3030 Coal, 50 g, 1.0 – 1.5 % S

92511-3040 Coal, 50 g, 1.5 – 2.0 % S

92511-3050 Coal, 50 g, 2.0 – 3.0 % S

92511-3060 Coal, 50 g, 3.0 – 4.0 % S

92511-3070 Coal, 50 g, 4.0 – 5.0 % S

92511-3080 Coal, 50 g, >5.0 % S

Coal, premium, C/H/N/S, ash, volatile content, certified

92550-3010 Coal, premium, 50 g, < 1.0 % S

92550-3020 Coal, premium, 50 g, > 1 % S

92550-3040 Coal, premium, 50 g, 1.0 – 3.0 % S

92550-3060 Coal, premium, 50 g, > 3.0 % S

Coke, premium, C/H/N/S, ash, volatile content, certified

92560-3010 Coke, premium, 50 g

Pet coke, premium, C/H/N/S, ash, volatile content certified

92570-3020 Pet coke, premium, 50 g, > 1 % S

92570-3040 Pet coke, premium, 50 g, > 1 % S

Liquid calibration material

92530 Oil, 100 ml

90860 Glycerine, 100 g

Spare and wear parts ELTRA CS-d

1), 有害物質

2), 測定範囲はサンプル重量および材質により変わります